Grab Rails |Grab Rail| Grab Rail Kit | Doc M Pack |Shower Rail| Bath Seat

Doc M Pack Includes

1 x 480mm Low Level Pan, Cistern and Flush Pipe

Chrome Spatula Flushing Lever, British Water Reg. Fittings

Ring Seat

450 x 340 wall Basin & Brackets

Sequential Mono mixer, waste & bottle trap - WRAS approved

5 x Grab Rails

1 x Hinged Arm Support with integral toilet roll holder

1 x 430 x 260 Back Rest Rail & Cushion (supplied with low level pack only)

TMV 2 & 3 valves available as extras

Cisterns are side entry inlet as standard but can be modified to accommodate alternatives

Please Note The Doc M Pack Does Not Include

Soap Dispenser

Tissue Dispenser

Hand Dryer

Doc M Dimensions

About Doc M Pack

Grab Rails
Epoxy polyester powder coated grab rails, mixer tap and flushing lever not recommended for
use in temperatures below 1°Celsius (33.8° Fahrenheit)

Bottle Trap
32mm Telescopic Nuflo basin bottle trap (38mm seal), as per Building Regulations 1991
Approved Document H, not to be installed any further than 3 metres from soil stack. Requires
75mm trap seal water depth. Manufactured to BS3943

Inlet Valve
Inlet valve is fitted with high pressure valve seat as standard; working pressures from 3 bar to
14 bar static.
- Alternative low pressure valve seat can be found in spares pack and will allow an operating
range of 0.01 bar to 3 bar.

Mixer Tap
-Minimum operating pressure is 0.2 bar with a maximum operating pressure of 5 bar.
N.B: Mixer flow rate at 0.2 bar is 3 litres per minute.

Thermoset Ring Seat
- Split resistant seat with top fittings manufactured to withstand approx: 158 kgs of weight

Price: £525.00 £630.00 (Including: VAT at 20%)